Patagonia Men's Pluma Jacket
An unfailing companion on any mountain adventure, the Pluma Jacket uses lightweight, durably waterproof/breathable and windproof 3-layer GORE-TEX® PRO fabric with GORE® Micro Grid backer Technology in a simple yet fully featured, packable hard shell.
- Lightweight, waterproof and durable, the 3-layer GORE-TEX® PRO fabric featuring GORE® Micro Grid Backer Technology combines superior waterproof/breathable performance in a lightweight yet durable fabric
- Minimal seams are reinforced with narrow seam tape for low bulk
- Hood adjusts with single-pull Cohaesive® embedded cord-lock system to work equally well with any type of helmet or a bare head
- Two high handwarmer pockets with watertight zippers stay clear of a harness or pack waistbelt; one exterior left-chest pocket with watertight zipper and one interior right-chest pocket
- Watertight, 2-way pit zips for venting
- Cohaesive® embedded cord-lock system has two contact points at hem for intuitive, one-handed operation
- Cuff features minimal self-fabric hook-and-loop cuff closure and textured polyurethane inner cuff that grips gloves, sealing out the elements
- 414 g (14.6 oz)
3-layer, 3.4-oz 40-denier 100% recycled nylon plain-weave GORE-TEX® PRO shell with a 15-denier GORE® Micro Grid Backer Technology woven backer and a DWR (durable water repellent) finishView The Footprint Chronicles
The construction of 3-Layer GORE-TEX® Products is unique. A 3-layer GORE-TEX® membrane is sandwiched between a soft outer material and a knit polyester backing material that increases durability. These garments keep you comfortable and protected from the elements without adding extra bulk or weight.
The GORE-TEX® membrane has 9 billion pores per square inch, with each pore 20,000 times smaller than a water droplet. These tiny holes are too small for water and wind to pass through from the outside. But these same pores are large enough for moisture vapor to pass through, so your body's perspiration is able to escape and you won’t feel clammy or uncomfortable inside your jacket.
Although we’ve been using recycled polyester in our garments for 20 years, for some reason locked deep in polymer chemistry, nylon is more difficult to recycle than polyester. After years of research, development, and testing, we’re finally finding some recycled nylon fibers that are suitable for apparel.
Some of the recycled nylon we use comes from post-industrial waste fiber, yarn collected from a spinning factory, and waste from the weaving mills that can be processed into reusable nylon fiber.
We’re diligently searching for a success story with recycled nylon. The challenge lies ahead of us, and we’re committed to discovering the best methods to recycle nylon fiber, but it appears this evolution will take many years.